In today's rapidly developing industrial era, the application of hydraulic technology has become an important force to promote industrial progress.Shanghai Yangyu HydraulicScience and Technology Co., Ltd., as a leader in the field of hydraulic technology, with its extraordinary technical strength and innovative spirit, has provided efficient and reliable solutions for many industries at home and abroad. This article will take you into Shanghai Yangyu Hydraulic Technology Co., Ltd. to explore how it can occupy a place in the global industrial field with advanced hydraulic technology and services.

IdentifyHydraulic stationCauses of low oil pressure: Diagnostic techniques

There may be many reasons for the low oil pressure in the hydraulic station, and the quality and quantity of the hydraulic oil need to be checked. If the amount of oil is insufficient orOil受到污染，将直接导致油压下降。需检查system中是否存在泄漏，过程中的任何泄漏都会造成压力损失，常见的泄漏点包括接头、管道和油缸密封等。

The failure of the hydraulic pump is also one of the main factors that cause the low oil pressure. It is necessary to confirm the working status of the pump. It may be due to wear or damage to the pump, which prevents it from normally outputting the required pressure. At the same time, the setting and adjustment parameters of the hydraulic station also need to be carefully checked. It may be that the system cannot maintain normal oil pressure due to improper setting of the pressure regulating valve.

implementationhydraulic system的诊断技巧时，应使用压力表监测油压，并与设备的标准参数进行比较。如发现差异，还需对油管进行风检以排除空气进入油路的可能。检查系统内的filter，若过滤器堵塞，会影响油流动并降低油压。根据诊断结果逐一排查，有助于找出导致液压站油压低的具体原因。

Practical methods for increasing the oil pressure in hydraulic stations: operation steps

Raising the oil pressure of the hydraulic station is an important operation to ensure the normal operation of the equipment. The following are some practical methods and operating steps. Check the oil level of the hydraulic system to ensure that the oil level is within the normal range. If the oil level is lower than the normal line, hydraulic oil that meets the requirements needs to be added. Check the oil filter and tubing to make sure there is no clogging or leakage. Regular replacement or cleaning of the oil filter can effectively increase the oil pressure.

Next, start the hydraulic pump and monitor the oil pressure gauge to confirm whether the oil pressure has risen to the required range. If the oil pressure does not meet expectations, the pressure setting of the pump may need to be adjusted. Usually, there will be a pressure regulating valve on the hydraulic pump, and the oil pressure can be moderately increased or decreased by rotating the regulating valve. Note that care should be taken during the adjustment process to avoid sudden increase or decrease in damage to the equipment.

Regular maintenance of hydraulic station equipment is also essential. Keeping equipment and components clean can reduce wear and improve work efficiency. After system testing is carried out to ensure that the oil pressure is stable, the differential pressure valve can be used to monitor the overall state. Observe whether there is any abnormal sound during the operation, and pay attention to whether there is any leakage. If necessary, contact a professional for maintenance in time.

With the wave of Industry 4.0 sweeping the world, Shanghai Yangyu Hydraulic Technology Co., Ltd. is promoting the development and innovation of hydraulic technology with extraordinary speed and determination. The company not only continues to make breakthroughs in technology, but is committed to providing customers with more personalized and efficient solutions. Looking to the future, Shanghai Yangyu Hydraulic Technology Co., Ltd. will continue to uphold the entrepreneurial spirit of “innovation, cooperation, integrity, and transcendence”, and work with global partners to jointly create a new chapter in hydraulic technology. We firmly believe that through unremitting efforts and continuous innovation, Shanghai Yangyu Hydraulic Technology Co., Ltd. will go further on the road of hydraulic technology and contribute more Chinese wisdom and strength to the development of global industry.