Hydraulic stationDaily maintenance skills：

The daily maintenance of the hydraulic station is essential to ensure its long-term stable operation. It is essential to regularly check the oil level and quality of hydraulic oil. Low oil level or poor oil quality will affect the performance of the system and even cause damage to the equipment. It is recommended to conduct a quarterly oil inspection and replace it in time as needed.

keephydraulic systemThe cleanliness is equally important. Clean the fuel tank and filter regularly to prevent impurities from entering the system, which can effectively extendHydraulic componentsThe service life of. During each maintenance, each connection part should be checked for leaks, and the seals should be tightened or replaced in time.

Check the hydraulic pump regularly、valveAnd the working state of the actuator to ensure that they run smoothly and without abnormal noise or vibration. If a problem is found, it should be repaired or replaced immediately. The establishment of detailed maintenance records helps to track the operating status of the equipment and detect potential problems in a timely manner, so as to avoid sudden failures.

Fault diagnosis and treatment method of hydraulic station：

The fault diagnosis and treatment methods of hydraulic stations involve many aspects, and it is necessary to have an in-depth understanding of the basic working principles of the hydraulic system. Common faults include unstable pressure, insufficient flow, excessive oil temperature, and excessive noise. During the diagnosis, the quality and oil level of the hydraulic oil should be checked to ensureOilClean and within the prescribed range. Check the working status of the hydraulic pump, including whether the suction port of the pump is clogged and whether the seal of the pump is intact.

For failures with unstable pressure, it may be caused by improper adjustment of the relief valve or stagnation of the spool, and corresponding adjustments or cleaning are required. The problem of insufficient flow may be related to the wear of the hydraulic pump or the blockage of the pipeline. The worn parts should be replaced in time or the pipeline should be cleaned up. The high oil temperature is usually due to poor heat dissipation of the system or excessive load, which can be solved by increasing the heat sink or reducing the load.

Excessive noise may be due to mechanical failure of the hydraulic pump or motor, or the air in the hydraulic oil is mixed. It is necessary to check and remove the air, and replace the hydraulic pump or motor if necessary. When handling faults, safety operating procedures should be followed to avoid more serious damage or safety accidents caused by improper operation.